Reverse Input Clutch Backing Plate Selection
WARNING: This page is about a different variant/trim than selected.
Reverse Input Clutch Backing Plate Selection Table
| Plate Thickness |
Identification |
| 7.249-7.409 mm (0.285-0.292 in) |
2 |
| 6.678-6.519 mm (0.263-0.257 in) |
3 |
| 5.947-5.787 mm (0.234-0.228 in) |
4 |
| Backing Plate Travel: 1.02-1.94 mm (0.40-0.76 in) |