Low and Reverse Clutch Spacer Plate Selection
WARNING: This page is about a different variant/trim than selected.
Low and Reverse Clutch Plate Selection Table
| Selective Plate | ||
|---|---|---|
| Measured Dimension | Identification | Thickness |
| 28.065-27.545 mm (1.105-1.084 in) | None | 1.684-1.829 mm (0.066-0.072 in) |
| 28.586-28.066 mm (1.125-1.105 in) | 0 | 1.314-1.168 mm (0.052-0.046 in) |
| 27.544-27.026 mm (1.084-1.064 in) | 1 | 2.198-2.344 mm (0.087-0.092 in) |