LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Reaction Gear and Carrier Installation >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 36850  Transjel Lubricant

    Fig 1: View Of Reaction Carrier/Support Thrust Bearing Assembly
    GM190451Courtesy of GENERAL MOTORS CORP.
  1. Install the reaction gear support to case bearing (692) onto the internal reaction gear support (685). Retain the bearing using J 36850  or equivalent.
  2. Install the internal reaction gear (684) and the internal reaction gear support (685) into the case.
  3. Install the reaction carrier/support thrust bearing assembly (683) into the internal reaction gear support (685). Retain bearing with J 36850  .
    4. Fig 2: Identifying Reaction Carrier Assembly
    GM190447Courtesy of GENERAL MOTORS CORP.
  4. Install the reaction carrier assembly (681) into the internal reaction gear.
scientia non olet · About LEMON Manuals