LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Reaction Carrier Shaft Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Reaction Carrier Shaft Front Bushing
    GM5476Courtesy of GENERAL MOTORS CORP.
  1. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a new reaction carrier shaft front bushing (665). See Special Tools .
  2. Fig 2: View Of Reaction Carrier Shaft Rear Bushing
    GM5477Courtesy of GENERAL MOTORS CORP.
  3. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a reaction carrier shaft rear bushing (667). See Special Tools .