LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Description and Operation >> Automatic Transmission Hydraulic Diagrams >> Overdrive Range, Fourth Gear - Torque Converter Clutch Applied >> 2-4 Servo Assembly

2-4 Servo Assembly

WARNING: This page is about a different variant/trim than selected.

4th fluid is routed through the center of the servo apply pin and acts on the apply side of the 4th apply piston. 4th fluid pressure moves the 4th apply piston against the apply pin spring force acting on the release side of the 4th apply piston. This action moves the apply pin and applies the 2-4 band in order to obtain fourth gear.

scientia non olet · About LEMON Manuals