Conditions for Running the DTC

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0125, P0128, P0201, P0202, P0203, P0204, P0300, P0412, P0418, P0420, P0606, P1106, P1107, P1111, P1112, P1114, P1115, P1635, P1639, P2430, P2431, P2432, P2433 are not set.
More than 60 minutes has elapsed since the last cold start.
The system voltage is 9-18 volts.
The BARO parameter is more than 70 kPa.
The MAF sensor parameter is less than 33 g/s.
The AIR system is commanded ON.
The conditions are stable for more than 5 seconds.
DTC P2440 runs once per trip start up when the above conditions are met and AIR pump operation is requested.