LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> Door Ajar Indicator Malfunction >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

The driver door module (DDM) and the passenger door module (PDM) receive a discreet input from the driver door ajar switch and the passenger door ajar switch respectively. Likewise, the body control module (BCM) receives a discreet input from both the left and right rear door ajar switches. The door ajar switches are normally open when the doors are fully closed. When a door is open, the door ajar switch contacts close providing a path to ground. The driver information center (DIC) displays the appropriate door ajar message when one of the doors is open. The instrument panel cluster (IPC) receives a serial data message from either the BCM, DDM or PDM indicating the door ajar status. If the message is displayed and the vehicle speed is greater than 8.1 km/h (5 mph), a chime will sound as a reminder of the door ajar status.