LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Engine Control System & Fuel System - 3.7L - DTC P0133 To DTC P0355) >> DTC P0136 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. The PCM detects that the HO2S 2 did not transition below 300 mV and above 650 mV during the passive test.
  2. One of the following tests fail:
    • Lean Intrusive Test
      • The PCM detects that the HO2S 2 is more than 300 mV for 10 seconds.
      • The HO2S 1 is less than 350 mV.

        OR

    • Rich Intrusive Test
      • The PCM detects that the HO2S 2 is less than 650 mV for 10 seconds.
      • The HO2S 1 is more than 550 mV.
  3. DTC P0136 sets within 7 minutes when the above conditions are met.