LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Transfer Case - ISUZU T150) >> Repair Instructions >> Transfer Case Encoder Motor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of Transfer Case & Components
    GM1313605Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the following from the encoder motor (7):
    • The electrical connector (8)
    • The vent hose
    3. Fig 2: View Of Encoder Motor
    GM1313608Courtesy of GENERAL MOTORS CORP.
  3. Remove the encoder motor mounting bolts.
  4. Remove the encoder motor (3) and O-ring seal (2) from the transfer case.

    Discard the O-ring seal (2).

scientia non olet · About LEMON Manuals