Removal Procedure
WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement .
- Remove the 2 transmission mount bolts.
- Position a transmission jack under the transmission.
- Lift the transmission just high enough to remove the transfer case adapter.
- Remove the transfer case adapter mounting bolts.
- Remove the transfer case adapter from the transmission.
- Remove the transfer case adapter seal.
IMPORTANT:
The transmission mount DOES NOT have to be removed to perform the following service procedure.