LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Transfer Case - ISUZU T150) >> Repair Instructions >> Transfer Case Adapter Replacement (M30) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transfer Case Adapter
    GM1313619Courtesy of GENERAL MOTORS CORP.
  1. Lightly lubricate the transfer case adapter seal with clean transmission fluid.
  2. Position the NEW seal to the transfer case adapter.
  3. Install the transfer adapter to the transmission.
    4. NOTE: Refer to Fastener Notice .
  4. Install the transfer case adapter mounting bolts to the transmission.

    Tighten:  Tighten the transfer case adapter mounting bolts to 50 N.m (37 lb ft).

    5. Fig 2: View Of Transmission Mount Bolts
    GM747102Courtesy of GENERAL MOTORS CORP.
  5. Lower the transmission to the transmission mount.
  6. Install the transmission mount bolts.

    Tighten:  Tighten the transmission mount bolts to 50 N.m (37 lb ft).

  7. Remove the transmission jack.
  8. Install the transfer case assembly. Refer to Transfer Case Assembly Replacement .
scientia non olet · About LEMON Manuals