LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Timing Chain Guide Replacement - Upper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Upper Timing Chain Guide
    GM953977Courtesy of GENERAL MOTORS CORP.
  1. Position the upper timing chain guide to the cylinder head.
  2. Apply threadlock to the upper timing chain guide bolt threads. Refer to Sealers, Adhesives, and Lubricants .
    3. NOTE: Refer to Fastener Notice .
  3. Install the upper timing chain guide bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  4. Install the camshaft cover. Refer to Camshaft Cover Replacement .
scientia non olet · About LEMON Manuals