LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Pump Suction Pipe and Screen Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Pump Pipe
    GM858171Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil pan. Refer to Oil Pan Replacement .
  2. Remove the oil pump pipe screen brace bolts.
  3. Remove the oil pump pipe screen bolt.
  4. Remove the oil pump pipe screen from the engine.
  5. Remove and discard the oil pump pipe seal.
  6. Clean and inspect the oil pump pipe screen.
scientia non olet · About LEMON Manuals