LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Flywheel Replacement (RPO M30) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Flywheel
    GM953909Courtesy of GENERAL MOTORS CORP.
  1. Position the flywheel to the crankshaft
    2. NOTE: Refer to Fastener Notice .
  2. Install the new flywheel bolts.

    Tighten:  Tighten the flywheel bolts to 25 N.m (18 lb ft) plus an additional 50 degrees using the J 45059  .

  3. Install the transmission. Refer to Transmission Replacement (4WD) or Transmission Replacement (RWD) .
scientia non olet · About LEMON Manuals