LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Front Oil Seal
    GM637775Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
    2. IMPORTANT: Do not damage the engine front cover or the crankshaft.
  2. Pry out the crankshaft front oil seal using a suitable tool. Discard the seal.
scientia non olet · About LEMON Manuals