LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Front Oil Seal
    GM637775Courtesy of GENERAL MOTORS CORP.
  1. Apply engine oil to the outside diameter of the crankshaft front oil seal.
    2. Fig 2: Installing Crankshaft Front Oil Seal
    GM1243917Courtesy of GENERAL MOTORS CORP.
  2. Use the J 45951  to install the NEW crankshaft front oil seal.
  3. Remove the J 45951  .
  4. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
scientia non olet · About LEMON Manuals