LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Balance Shaft Drive Chain Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Balance Shaft Drive Chain
    GM953998Courtesy of GENERAL MOTORS CORP.
  1. Remove the balance shaft chain tensioner. Balance Shaft Chain Tensioner Replacement .
  2. Remove the balance shaft drive chain from the following:
    1. The crankshaft sprocket.
    2. The left balance sprocket.
    3. The right balance sprocket.