LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Water Pump Removal >> Tool Required

Tool Required

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

J 41240  Pulley Holding Tool

    Fig 1: View Of Water Pump Pulley, Bolts & J 41240
    GM856223Courtesy of GENERAL MOTORS CORP.
  1. Install J 41240  to hold the pulley.
  2. Remove the water pump pulley bolts.
  3. Remove J 41240  .
  4. Remove the water pump pulley
    5. Fig 2: View Of Water Pump, Gasket & Bolts
    GM856224Courtesy of GENERAL MOTORS CORP.
  5. Remove the water pump bolts.
  6. Remove the water pump.
  7. Remove and discard the water pump gasket.
scientia non olet · About LEMON Manuals