LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Pump Pipe and Screen Assembly Installation

Oil Pump Pipe and Screen Assembly Installation

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Pump Pipe
    GM858171Courtesy of GENERAL MOTORS CORP.
  1. Install a new oil pump pipe gasket.
  2. Install the oil pump pipe and screen assembly.
  3. Add sealant GM P/N 12346004 (Canadian P/N 10953480) to the oil pump pipe bolt threads.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the oil pump pipe and screen assembly bolts.

    Tighten:  Tighten the oil pump pipe and screen assembly bolts to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals