LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Pump Installation

Oil Pump Installation

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Oil Pump
    GM659575Courtesy of GENERAL MOTORS CORP.
  1. Install the oil pump pressure relief valve and spring.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the oil pump pressure relief valve plug.

    Tighten:  Tighten the oil pump pressure relief valve plug to 14 N.m (124 lb in).

  3. Install the oil pump outer and inner gears as removed.
  4. Install the oil pump cover.
  5. Install the oil pump cover bolts.

    Tighten:  Tighten the oil pump cover bolts to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals