Engine Lift Bracket Installation
WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the engine lift bracket.
- Install the engine lift bracket bolts in sequence.
Tighten:
- Tighten the engine lift bracket bolts a first pass in sequence to 5 N.m (44 lb in)
- Tighten the engine lift bracket bolts a final pass in sequence to 50 N.m (37 lb ft)
NOTE:
Refer to Fastener Notice
in Cautions and Notices.