LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Engine Front Cover Removal

Engine Front Cover Removal

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 7 mm Center Bolt
    GM1243909Courtesy of GENERAL MOTORS CORP.
  1. Remove the 7 mm center bolt (1) first.
  2. Loosen the engine front cover bolts.
  3. Remove the engine front cover and bolts.
    4. Fig 2: View Of Spacer Bolt
    GM1257819Courtesy of GENERAL MOTORS CORP.
  4. Remove the spacer bolt.
    5. IMPORTANT: The friction washer may have come off with the crankshaft balancer.
  5. Remove the crankshaft balancer friction washer from the crankshaft snout.
scientia non olet · About LEMON Manuals