LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical - 3.7L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Camshaft Cover Cleaning and Inspection

Camshaft Cover Cleaning and Inspection

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Camshaft Cover
    GM1816281Courtesy of GENERAL MOTORS CORP.
  1. Remove and discard the rubber ignition coil seals, and the camshaft cover seal.
  2. Clean the camshaft cover with a suitable cleaning solvent.
  3. Inspect the camshaft cover for cracks or damage.
  4. Inspect the bolt threads for damage.
  5. Replace the camshaft cover if necessary.
scientia non olet · About LEMON Manuals