LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Engine Control System & Fuel System - 3.7L - Introduction (2 Of 2)) >> Repair Instructions >> Powertrain Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of PCM
    GM1352004Courtesy of GENERAL MOTORS CORP.
  1. Install the PCM into the PCM mounting bracket, allowing the tabs to fully engage.
    2. Fig 2: View Of Engine Wiring Harness & Retainers
    GM1350711Courtesy of GENERAL MOTORS CORP.
  2. Connect the PCM harness connectors (2) to the PCM body (3).
  3. If a new PCM is being installed, the PCM must be programmed. Refer to Control Module References .
scientia non olet · About LEMON Manuals