LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Engine Control System & Fuel System - 3.7L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Injector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Rail Assembly, Injector And Clip
    GM1772140Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel rail assembly. Refer to Fuel Rail Assembly Replacement .
  2. Disconnect the fuel injector harness connector from the fuel injector.
  3. Remove and discard the fuel injector retainer clip (1).
  4. Remove the fuel injector from the fuel rail.
  5. Remove and discard the fuel injector O-ring seals (2 and 3) from the injector.
scientia non olet · About LEMON Manuals