LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Engine Control System & Fuel System - 3.7L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Hoses/Pipes Replacement - Fuel Tank >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Fuel and Evaporative Emission Pipe Caution .
CAUTION: Refer to Gasoline/Gasoline Vapors Caution .
NOTE: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice .
    Fig 1: View Of Fuel Feed And EVAP Lines
    GM1766211Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the evaporative emission (EVAP) line (1) quick connect fittings from the module and the vent valve. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Remove the EVAP line from the clip on the side of the fuel tank.
  4. Disengage the EVAP line from the retaining features molded into the fuel tank and remove the EVAP line.
scientia non olet · About LEMON Manuals