LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Engine Control System & Fuel System - 3.7L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Hoses/Pipes Replacement - Canister/Fuel Tank >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Fig 1: View Of EVAP Assembly
    GM1361712Courtesy of GENERAL MOTORS CORP.
  3. Refer to Plastic Collar Quick Connect Fitting Service  in order to disconnect the evaporative emission (EVAP) hoses (1, 3) from the following:
    • The EVAP canister (5)
    • The vent valve
  4. Disengage the EVAP hose (3) from the retaining clip on the fuel tank.