LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Engine Control System & Fuel System - 3.7L - Introduction (2 Of 2)) >> Component Locator >> Engine Controls Connectors >> Fuel Pump and Sender Assembly

Fuel Pump and Sender Assembly

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Pump and Sender Assembly Connector End View
GM684908Courtesy of GENERAL MOTORS CORP.
Fuel Pump and Sender Assembly Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 15326631
  • Service: 15306360
  • Description: 4-Way F GT 280 Series Sealed 5.8 (BK)
Terminal Part Information 
  • Pins: A, D, B, C
  • Terminal/Tray: 15304719/19
  • Core/Insulation Crimp: Pins A, D - 2/5
  • Core/Insulation Crimp: Pins B, C - E/5
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Fuel Pump and Sender Assembly Terminal Identification

Pin Wire Color Circuit No. Function
A BK 850 Ground
B PU 1589 Fuel Level Sensor Signal
C BK 2759 Low Reference
D GY 120 Fuel Pump Supply Voltage