LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Engine Control System & Fuel System - 3.7L - Introduction (2 Of 2)) >> Component Locator >> Engine Controls Connectors >> Camshaft Position (CMP) Sensor 2

Camshaft Position (CMP) Sensor 2

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position (CMP) Sensor 2 Connector End View
GM726825Courtesy of GENERAL MOTORS CORP.
Camshaft Position (CMP) Sensor 2 Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 15355370
  • Service: 15306431
  • Description: 3-Way F GT 150 Series Sealed 3.2X4.0 (BK)
Terminal Part Information 
  • Terminal/Tray: 15326267/19
  • Core/Insulation Crimp: E/4
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
Camshaft Position (CMP) Sensor 2 Terminal Identification

Pin Wire Color Circuit No. Function
A RD 1673 12-Volt Reference
B PU 2329 Camshaft Position Signal
C L-BU 2344 Low Reference
scientia non olet · About LEMON Manuals