Valve Lifter Removal - Right Side

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Left Stationary Hydraulic Lash Adjusters (SHLA)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Valve Lifter Priming Notice in Cautions and Notices.

IMPORTANT: Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLAs) and original location the components were assembled in.

Remove the stationary hydraulic lash adjuster (SHLAs) from the right cylinder head lifter bores.
Store the camshafts, followers and SHLAs in a clean, secure location.