LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine Mechanical - 4.6L - 2 Of 4) >> Off-Vehicle Repair Instructions (1 Of 3) >> Oil Pump Removal

Oil Pump Removal

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Pump Assembly Retaining Bolts
    GM204286Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil pump assembly retaining bolts (1, 2, 3) identified by the larger head size.
  2. Slide the oil pump assembly off the nose of the crankshaft with the drive collar in place.
  3. Wrap the oil pump in a towel for safe, clean storage until inspection or assembly is necessary.
scientia non olet · About LEMON Manuals