Engine Flywheel Removal

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 44214 Flywheel Holder. See Special Tools .

Fig 1: Identifying 8 Engine Flywheel Mounting Bolts

Courtesy of GENERAL MOTORS CORP.

Loosen the 8 engine flywheel mounting bolts.
Remove 7 of the 8 engine flywheel bolts leaving 1 bolt at the top of the crankshaft rotation.
Grip the engine flywheel and remove the remaining bolt. Do not drop the engine flywheel when removing the final bolt.

Fig 2: Removing J 44214 From Engine Block

Courtesy of GENERAL MOTORS CORP.

Remove the J 44214 from the engine block. See Special Tools .