LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine Mechanical - 4.6L - 2 Of 4) >> Off-Vehicle Repair Instructions (1 Of 3) >> Drive Belt Removal

Drive Belt Removal

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Accessory Drive Belt
    GM52981Courtesy of GENERAL MOTORS CORP.
  1. Insert a 1/2-inch drive ratchet in the drive belt tensioner (6).
  2. Rotate the drive belt tensioner clockwise in order to release the belt tension.
  3. Remove the drive belt from the power steering pulley (1).
  4. Slowly return the drive belt tensioner to its original position.
  5. Remove the drive belt from the remaining pulleys (2-5).
scientia non olet · About LEMON Manuals