Camshaft Cover Removal - Right Side

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 44212 Camshaft Holding Tool. See Special Tools .

Fig 1: Identifying Ignition Coil Ground Strap & Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the right camshaft cover ignition coil ground strap bolt.
Remove the right cylinder head ignition coil ground strap bolt.
Remove the right ignition coil ground strap.

Fig 2: Removal of Camshaft Cover

Courtesy of GENERAL MOTORS CORP.

Remove the camshaft cover bolts.
Lift the camshaft cover from the cylinder head.

Fig 3: Using Camshaft Holding Tool

Courtesy of GENERAL MOTORS CORP.

Install the J 44212 to the right cylinder head camshafts. See Special Tools .