LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Seat Belt System) >> Diagnostic Information and Procedures >> Seat Belt Indicator Circuit Malfunction - Driver >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the seat belt buckled, test for infinite resistance between the signal circuit terminal A and the low reference terminal B.
    • If not the specified value, replace the left seat belt switch.
  2. With the seat belt unbuckled, test for less than 2 ohms of resistance between the signal circuit terminal A and the low reference terminal B.
    • If greater than the specified range, replace the left seat belt switch.
scientia non olet · About LEMON Manuals