LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Engine Cooling System) >> Repair Instructions >> Water Pump Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Intake Camshaft End Cap
    GM1207144Courtesy of GENERAL MOTORS CORP.
  1. Release the outer water pump drive belt tensioner and remove the drive belt from the drive pulley. Refer to Water Pump Belt Replacement .
  2. Remove the end cap from the intake camshaft.
    3. Fig 2: View of J 38825
    GM52984Courtesy of GENERAL MOTORS CORP.
  3. Remove the water pump drive pulley from the intake camshaft using the J 38825  .
scientia non olet · About LEMON Manuals