LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Engine Cooling System) >> Repair Instructions >> Water Pump Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the water pump drive belt tensioner. Refer to Water Pump Drive Belt Tensioner Replacement .
  2. Fig 1: Removing/Installing Water Pump Drive Belt
    GM1667179Courtesy of GENERAL MOTORS CORP.
  3. Remove the water pump drive belt (1) by sliding the belt off of the drive pulley (3) and water pump pulley.