LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Engine Cooling System) >> Repair Instructions >> Drive Belt Tensioner Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Water Pump Drive Belt Tensioner Shield
    GM1662858Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove the water pump drive belt tensioner shield bolt/nuts.
  3. Remove the water pump drive belt tensioner shield.
scientia non olet · About LEMON Manuals