Circuit/System Testing
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the AIR solenoid valve.
- Ignition ON, connect a test lamp between the AIR solenoid voltage supply terminal 6 and the solenoid ground circuit terminal 4, the test lamp should not illuminate.
- If the test lamp illuminates, test the AIR solenoid supply voltage circuit for a short to voltage. If the circuit tests normal, test or replace the AIR solenoid relay.
- Inspect the AIR pump inlet and outlet hoses/pipes for leaks or restrictions.
- Inspect the AIR solenoid valve for leaks.
- If the solenoid valve inspects OK, replace the AIR pump.