Conditions for Setting the DTC

P0335

IMPORTANT: The ECM detects engine movement by sensing the airflow through the MAF sensor is more than 3 g/s, or by sensing camshaft position (CMP) sensor pulses.
• The ECM detects that the starter is commanded on and the engine has been cranking for more than 4 seconds without a CKP sensor pulse.

  OR

• The ECM detects that the engine is running, but does not receive a CKP sensor pulse for 2 of 10 engine revolutions.

  OR

• The ECM detects that the engine is running, but does not sync.

P0336

IMPORTANT: The ECM detects engine movement by sensing the airflow through the MAF sensor is more than 3 g/s, or by sensing CMP sensor pulses.
• The ECM detects that the engine is running, but receives less than 55 or more than 61 CKP sensor pulses each engine revolution for 8 of 10 engine revolutions.

  OR

• The ECM detects that the engine is running, but more than 19 resyncs occur within 25 seconds.