Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Applique Side Door Trim Panel Nut | 2 N.m | 18 lb in |
| Armrest Bracket Screw | 2 N.m | 18 lb in |
| Armrest Pull Cup Screw | 2 N.m | 18 lb in |
| Closeout Door Handle Esutcheon Screw | 2 N.m | 18 lb in |
| Coat Hook Screw | 9 N.m | 80 lb in |
| Front Floor Console Cupholder Screw | 2 N.m | 18 lb in |
| Garnish Molding Screw | 2 N.m | 18 lb in |
| Handle Assembly Assist Screw | 6 N.m | 53 lb in |
| Side Door Armrest Screw | 2 N.m | 18 lb in |
| Side Door Armrest Switch Mount Screw | 2 N.m | 18 lb in |
| Side Door Handle Escutcheon Nut | 2 N.m | 18 lb in |
| Sunshade Bolt | 3 N.m | 25 lb in |
| Sunshade Support Screw | 3 N.m | 25 lb in |
| Upper Rear Quarter Trim Panel Screw | 6 N.m | 53 lb in |