Instrument Panel Center Support Bracket Replacement

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bracket - Instrument Panel (I/P) Center Support

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the instrument panel carrier assembly. Refer to Instrument Panel Carrier Replacement . Pull the carpet back enough to expose the instrument panel center support bracket bolts.
1	Bolt, Instrument Panel Center Support Bracket (Qty: 4) Tighten: 25 N.m (18 lb ft)
2	Bracket Assembly, Instrument Panel Center Support

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the instrument panel carrier assembly. Refer to Instrument Panel Carrier Replacement .
Pull the carpet back enough to expose the instrument panel center support bracket bolts.

Bolt, Instrument Panel Center Support Bracket (Qty: 4)

Tighten: 25 N.m (18 lb ft)

Bracket Assembly, Instrument Panel Center Support