Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Compressor Relay | Air Suspension Control Module | Commands the compressor relay ON and OFF. |
| Depressurize System | Air Suspension Control Module | Commands the air suspension module to deflate the air springs. |
| Exhaust Valve | Air Suspension Control Module | Commands the air suspension exhaust valve ON and OFF. |
| LR Control Valve | Air Suspension Control Module | Commands the control valve solenoid ON and OFF. |
| Pressurize System | Air Suspension Control Module | Commands the air suspension module to inflate the air springs. |
| RR Control Valve | Air Suspension Control Module | Commands the control valve solenoid ON and OFF. |
| Suspension Position Calibration | Air Suspension Control Module | Commands the air suspension module to calibrate trim height. |
| Suspension Calibration Adjustment | Air Suspension Control Module | Commands the air suspension module to adjust for slight variation in trim height after performing the Suspension Position Calibration. |