Scan Tool Data Definitions
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Air Pressure Sensor
-
Range 0.5 - 4.5V. Voltage measured by the suspension control module.
- Air Press. Sen. 5V Reference
-
Indicates if the 5-volt reference circuit for the height sensor and the pressure sensor is active.
- Air Suspension Mode Status
-
Indicates OK or Jack is measured by the suspension control module.
- Control Valves 12V Ref.
-
Range 0.0 - 20.0 V. Voltage measured by the suspension control module.
- Compressor Relay Cmd.
-
Indicates when the compressor relay is activated.
- Compressor Temperature
-
Identifies when the compressor thermal trip has set.
- Exhaust Valve Command
-
Indicates when the exhaust valve is active.
- LR Position Sensor
-
Range 0.3 - 4.7 V. Indicates the vehicle height measured in volts.
- LR Control Valve Cmd.
-
Indicates when the inlet valve is active.
- RR Position Sensor
-
Range 0.3 - 4.7 V. Indicates the vehicle height measured in volts.
- RR Control Valve Cmd.
-
Indicates when the inlet valve is active.
- Suspension Pos. Sen. 5V Ref.
-
Indicates if the 5-volt reference circuit for the suspension position sensor is active.