LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Transaxle - 4T80-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - On Vehicle >> Fluid Level Indicator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Transmission Fluid-level Indicator
    GM99522Courtesy of GENERAL MOTORS CORP.
  1. Install the fluid-level indicator into the transmission.
  2. Push the indicator straight into the transmission. Rotate clockwise in order to lock.
scientia non olet · About LEMON Manuals