Channel Plate Assemble

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 39630-1 Guide Pins. See Special Tools .
J 39630-2 Guide Pins. See Special Tools .

Fig 1: Locating Lower Channel Plate Accumulator Bores & Mating Surfaces

Courtesy of GENERAL MOTORS CORP.

Inspect the lower channel plate accumulator bores and mating surfaces for scratches or damage.

Fig 2: Inspection Areas On Lower Channel Plate

Courtesy of GENERAL MOTORS CORP.

Inspect the bottom side of the lower channel plate for damage to the bolt holes or debris in passages.

Fig 3: Installing The Spacer Plate And Gasket Assembly (935) Onto The Lower Channel Plate Using J 39630-1 & J 39630-2

Courtesy of GENERAL MOTORS CORP.

Insert the J 39630-1 into the lower channel plate (900) and rest the channel plate on the guide pin heads. See Special Tools .
Install the J 39630-2 into the lower channel plate (900). See Special Tools .
Install the spacer plate and gasket assembly (935) onto the lower channel plate (900).