LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Transaxle - 4T80-E - Introduction (2 Of 2)) >> Description and Operation >> Automatic Transmission Hydraulic Diagrams >> Overdrive Range, Fourth Gear - Torque Converter Clutch Applied >> Notes

Overdrive Range, Fourth Gear - Torque Converter Clutch Applied: Notes

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

The torque converter clutch applies during fourth gear operation after the Transmission Control Module (TCM) receives the appropriate input signals to energize the torque converter clutch (TCC) solenoid. To apply the torque converter clutch, the following changes take place in the electrical and hydraulic systems:

scientia non olet · About LEMON Manuals