Disassembly Procedure
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the mounting bracket bolts (3) from the mounting bracket assembly (2).
- Remove the mounting bracket assembly (2) from the pump (1).
- Remove retaining clips (2) from the reservoir assembly (1) using J-42649 . See Special Tools .
- Remove reservoir (1) from the hydraulic pump housing (3).
- Remove the O-ring seal (2) from the reservoir (1).
- Discard the O-ring seal (2).