LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Parking Brake System) >> Repair Instructions >> Park Brake Warning Lamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout/insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Remove the left knee bolster. Refer to Driver Knee Bolster Replacement .
  3. Remove the left front carpet retainer. Refer to Front Carpet Retainer Replacement .
    4. Fig 1: Removing/Installing Park Brake Lever & Cable Assembly
    GM107329Courtesy of GENERAL MOTORS CORP.
  4. Remove the park brake pedal assembly mounting nuts (1, 2).
  5. Position the park brake pedal assembly away from the mounting studs.
    6. Fig 2: View of Park Brake Warning Lamp Switch Mounting Bolt
    GM153110Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the park brake warning lamp switch.
  7. Remove park brake warning lamp switch mounting bolt.
  8. Remove park brake warning lamp switch.
scientia non olet · About LEMON Manuals