LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Hydraulic Brake System) >> Repair Instructions >> Vacuum Brake Booster Check Valve and/or Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Vacuum Hose & Brake Booster Vacuum Check Valve
    GM688427Courtesy of GENERAL MOTORS CORP.
  1. Connect the vacuum hose (2) to the intake manifold (1).
    2. Fig 2: View Of Vacuum Brake Booster Check Valve And Vacuum Brake Booster Hose
    GM688567Courtesy of GENERAL MOTORS CORP.
  2. Install the vacuum brake booster check valve (2) to the vacuum brake booster hose (1).
  3. Connect the vacuum hose (2) to vacuum brake booster.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About LEMON Manuals